We finally got around to adding the T-Track and a new wasteboard to the Onefinity CNC! Our X-Carve had a threaded insert wasteboard and we wanted to change it up and try out the t-track system, and so far I’m liking it. We just need more accessories… We’ll give you a quick break down on how we added the T-Track and a fresh wasteboard with a super fancy grid pattern!

Things you’ll need:

Step 1: Find your actual cut area

I jogged the machine around the outside of its cut area making marks at its max reach.

Step 2: Add T-Tracks to the outside of the cut area

Step 3: Find the center of your cut area

Make sure to make a mark on the front and back of the machine ensuring your T-Tracks are straight.

Step 4: Add the remaining tracks

Step 5: Measure and add your MDF wasteboard

Step 6: Attach MDF pieces

Make sure your screw holes are counter sunk deep enough so they won’t be in the way of cutting or surfacing your waste board.

Step 7: You’re done! We went ahead and engraved a grid in ours!

Recommend Videos:

Meyers Woodshop Threaded Wasteboard Video: https://youtu.be/6OoMsJezGUc Crafted Workshop T-Track Video: https://youtu.be/Hp3ofqjqM40

Current affiliate promo codes:

Isotunes promo code 10% off TWOMOOSE10 https://isotunes.com BAD Workwear promo code 10% off TWOMOOSE10 https://www.badnorthamerica.com